TRIO 2.0 – User Manual
Powering ON / OFF
-
Press the main button five (5) times quickly to turn your TRIO 2.0 on or off.
-
The device will automatically shut off after 4 minutes of inactivity.
Hot Blade Function
-
Press and hold the button to activate the heating blade.
-
Release the button to stop heating.
-
Heating is limited to 5 seconds per cycle for safety.
-
The five dots beside the battery symbol will fade in sequence to show the countdown.
-
To reheat, simply press and hold the button again.
Infrared Temperature Reader
-
Point the IR sensor (located at the bottom of the TRIO 2.0) toward the object you wish to measure.
-
Hold the sensor about 1–2 inches away for the most accurate reading.
-
The screen will instantly display the temperature.
LED Light
-
Double-press the button to turn the LED light ON or OFF.
-
Designed for visibility during night or low-light sessions.
Laser Guide
-
Press the button three (3) times to turn the laser guide ON or OFF.
-
⚠️ WARNING:
-
Do not point the laser at eyes or faces.
-
Avoid direct or reflected exposure.
-
Keep away from children and pets.
-
Use only as intended.
-
Battery & Charging
-
When the battery is low, the indicator light flashes five times before shutting down.
-
During charging, the battery bars cycle upward to show progress.
-
A full charge takes approximately 1 hour.
Charging Specifications
-
Battery Capacity: 430 mAh | Voltage: 3.7 V
-
Maximum Output Power: 15 W
-
Ceramic Blade Resistance: 0.9 Ω – 1.2 Ω
-
Recommended Charger: 5 V / 1 A
-
Standby Current: < 10 µA
Package Contents
1.TRIO 2.0 Device
1.USB-C Charging Cable
1.Instruction Manual (QR Code Link)
1.Warranty Card